Fire Hole Repair

shares

Fire hole repairs can be done in different ways. So we know the spot repair technique and the weaving method.


FABRIC REPAIR THE SPOT REPAIR METHOD

The spot repair method originated in America and is widely applied to fabric  sofas. It is a method that is ideal when you, for example, a cigarette a cigarette in your coat from your couch made.

FABRIC REPAIR A CIGARETTE

The substance repairer has a suitcase full of new fiber fabric in various colors. Often there is an appropriate color by default in the dust bag. If no matching color is the new fabric fibers are mixed together until a suitable color. For this purpose, a special size is used with which the fabric fibers are made loose to be able to mix properly.
First, the hard edges of becoming burnt hole removed and then confirm a sling under the fabric.
On the carrying cloth is Horticultural special glue applied layer. The mixed fibers by color come into a blow bottle. This allows the repairer dust can blow the fibers on the adhesive layer. Thus, the missing material is glued with new fibers.
Now there are several ways to glue the fabric on the sling.
Some use a Teflon mat with a small iron to glue them in the new fibers.
Others will use a cold method with a suitable adhesive.
A spot repair method is most suitable for  Alcantara  suede-like fabrics. When the damage  in a woven fabric's structure can be reduced somewhat by the cold method. The pattern can be restored in the dust by re-coloring in the new fabric fibers. A cigarette can be restored that way properly but remains visible.

FABRIC WITH REPAIR WEAVING

There are not many people who still use this technique because it is a very labor-intensive method, and often too expensive for that reason. The coarser the material, the easier the recovery work.
It is a technique that is similar to stopping knitted socks. Especially when you have the same thread of the damaged fabric can make the virtually invisible repair.
This method is not suitable for any coating, such as Alcantara substances. Above the spot repair technique is the best method. But for these woven fabrics weaving technique can be applied properly.
With a long blunt needle will accumulate the same or substantially the same wire of some centimeters larger than the hole through the fabric. Then you repeat that, but vertically over the hole. Tapestry: just do a few stitches back and pull through the resulting loop. Actually not that difficult but it requires a lot of patience and accurate work.
Tip: You might well not have an adequate wire to close the gap, then still take out the cover of the bank get some wires that you can use.
Holes larger than 4 cm actually qualify for a partial refurbishing, because the loss of this size can not be inconspicuous.

FIRE HOLE REPAIR YOURSELF

Self-repair is doing a burn when you can use the weaving technique. Composed the fabric or Alcantara suede fabric, then it is better to let it run by a furniture repair business.

WOULD YOU PREFER US TO CARRY OUT THE REPAIR?

Enter your details below and we will get the same day in touch with you to make you a proposal

Related Posts

0 comments:

Post a Comment